BDCOM S5828 24 Port 10G Port with 100G Uplink Core Switch

BDCOM S5828 10G Switch

BDCOM S5800 Series is a new generation full10GE TOR switches oriented for high performance computing, data center and high-end campuses.
S5800 Series adopts the advanced hardware architecture design. S5800 Series (1U height) supports up to 2.56Tbps switching capacity and 48 10GE ports + 2 40GE ports + 4 100G ports or 72 10GE ports.

S5800 Series supports BVSS, TRILL, SDN and FCoE/ FC. By cooperating with S9500 Series, S5800 Series can converge data of 15000+ 10GE servers. Developed on the basis of BDROS 6 – a software platform BDCOM with its own independent intellectual property rights, S5800 Series provides high-performance L2/L3/L4 wire speed switching capacity by integrating services such as IPv6, MPLS VPN, network security, flow analysis, virtualization, with high reliable techniques including continuous forwarding, graceful restarting and loop network
protection, the work efficiency of S5800 Series and its maximum running time are guaranteed.

S5800 Series supports the “GreenTouch” architecture and “Smart@CHIP”. Its power consumption is lower than 200W. S5800 Series has 4 models: S5828, S5832, S5864

Carrier-Level Aggregation Layer-3 Ethernet Switch Innovative BVSS (BDCOM Virtual Switch System): virtualize multiple physical devices into one. The performance, reliability and management of the virtual system are superior to the physical ones; Improved Performance: BVSS makes full use of each link in the physical devices, which avoids STP blocking the link and protects the original link to the maximum extent; High Reliability: Based on the advanced distribution mechanism and efficientcross – physicallink ggregation link function, the logic control plane, service control plane and service data plane are separated. Thus, the device can support continuous layer3 routing forwarding, avoiding service interruption as a result of a single point of failure; E a s y Management : BVSS realizes single IP
management, greatly improving the networking efficiency and lowering the operating cost.
S5800 series switches
Ethernet routing switch with 24 10GE ports, 2 40GE ports and 4 GE ports (1 console port, 1
out-band port, 24 10GE/GE SFP+ ports, 2 40GE QSFP+ ports (each 40GE port can expand
to 4 10GE ports); 2 power slots with 2 hot-swap AC220V power supplies; 5 fan slots,
including 5 fans; 1U, 19-inch rack-mounted installation)
Ethernet routing switch with 48 10GE ports, 4 40GE ports (1 console port, 1 out-band port,
1 USB2.0, 48 10GE/GE SFP+ ports, 4 40GE QSFP+ ports (each 40GE port can expand to 4
10GE ports); 2 power slots with 2 hot-swap AC220V power supplies; 5 fan slots, including 5
fans; 1U, 19-inch rack-mounted installation)
Ethernet routing switch with 24 10GE ports, 4 100GE ports (1 console port, 1 out-band
port, 24 10GE/GE SFP+ ports, 4 100GE/40GE QSFP28 ports (can expand to 4 10GE ports);
2 power slots with 2 hot-swap AC220V power supplies; 4 fan slots, including 4 fans; 1U, 19-
inch rack-mounted installation)
S5864H Ethernet routing switch with 48 10GE ports, 2 40GE ports and 4 100GE ports (1 console
port, 1 out-band port, 48 10GE/GE SFP+ ports, 2 40GE QSFP+ ports, 4 100GE (can expand
to 4 10GE ports), 2 power slots with 2 hot-swap AC220V power supplies; 4 fan slots,
including 4 fans; 1U, 19-inch rack-mounted installation)
QSFP+SR4
QSFP+LR4-10 40G QSFP+ optical module (100m, 850nm, MPO, DDM, supports 1 to 4)
10GE SFP+-to-RJ45 module
40G QSFP+ optical module (10Km, 1310nm, LC, DDM)
10GE SFP+ multi-mode (300m, 850nm, LC)
Optical Modules
40GE optical modules