TP-Link Archer AX206 AX11000 Tri-Band 10G Wi-Fi 6E Router

* Maximum wireless signal rates are the physical rates derived from IEEE Standard 802.11 specifications. Actual wireless data throughput, wireless coverage, and quantity of connected devices are not guaranteed and will vary as a result of network conditions, client limitations, and environmental factors, including building materials, obstacles, volume and density of traffic, and client location.

* Use of 802.11ax Wi-Fi standard requires clients to also support the 802.11ax Wi-Fi standard.

* Use of MU-MIMO requires clients to also support MU-MIMO.

* The amendment defines standardized modifications to both the IEEE 802.11 physical layers (PHY) and the IEEE 802.11 Medium Access Control (MAC) layer that enable at least one mode of operation capable of supporting improvement of at least four times the average throughput per station (measured at the MAC data service access point) in a dense deployment scenario.

* Full utilization of HT160 requires a client device that supports 160 MHz bandwidth.

* This router may not support all the mandatory features as ratified in Draft 3.0 of IEEE 802.11AX specification.

* 10 Gbps internet speed requires compatible service plans from ISPs.

* Use of WPA3 requires the later firmware upgrade and compatible devices.

* Use of VPN Client requires the later firmware upgrade.

*80/160 MHz channel works on the 5 GHz band only

*The 160 MHz bandwidth may be unavailable in some regions/countries due to regulatory restrictions

**Product is being developed and the pictures are design sketches for reference only.