Filter

GCOM S5330-28SX L2+ Switch

  • GE Port – 20*100/1000Base-X
  • Expansion Port – 4*GE Combo, 4*10GE SFP+
  • Forwarding Capacity – 95Mpps
  • Backplane – 128Gbps
  • Power Consumption – ≤60W
  • 16K MAC address
  • AC 220V

অর্ডার করার পূর্বে কাস্টমার কেয়ার থেকে পন্যের স্টক ও ডেলিভারি সম্পর্কে জেনে নেয়ার অনুরোধ করা যাচ্ছেঃ

Add to wishlist
Categories: ,

Description
Switching Capacity 128Gbps
Forwarding Capacity 95Mpps
Memory and Storage 512MB SDRAM and 16MB flash memory
Power Supply AV:  100～240V, 47～67Hz；
Power Consumption Full-load consumption ≤60W
Idle-power consumption ≤20W
Dimensions (Width x Depth x Height) 440mm*280mm*44mm
Weight (Full-Loaded) ≤3kg
Environmental Requirements Working temperature: -15°C～50°C
Storage temperature: -40°C～70°C
Relative humidity: 10%～90%, non-condensing

 

L2 Features MAC 16K MAC
Aging time and add/remove static MAC
Port MAC Limit
Disable MAC address learning on port or channel-group
MAC address filtering
VLAN 4K VLAN entries.
Port-based and MAC-based VLAN
Q-IN-Q
Spanning Tree STP/RSTP/MSTP
Remote loop detecting
Port Bi-directional bandwidth control
Static link aggregation and LACP(Link Aggregation Control Protocol)
Port mirroring
Security Features Ipv4 DHCP Relay
DHCP Server
Static ARP
L3 forwarding specification to be 512
Static route
64 LPM (default router )
IP Routing User’s Security Anti-ARP-spoofing
Anti-ARP-flooding
IP Source Guard create IP+VLAN+MAC+Port binding
Port Isolation
MAC address binding to the port and MAC address filtering
IEEE 802.1x and AAA/Radius authentication
Device Security Anti-DOS attack(such as ARP, Synflood, Smurf, ICMP attack), ARP
detection, worm and Msblaster worm attack
SSHv2 Secure Shell
SNMP v3 encrypted management
Security IP login through Telnet
Hierarchical management and password protection of users
Network Maintenance Dynamic ARP table-based binding
IP+VLAN+MAC+Port binding
L2 to L7 ACL flow filtration mechanism on the 80 bytes of the head of user-defined packet
Port-based broadcast/multicast suppression and auto-shutdown risk port
DHCP Option82 and PPPoE+ upload user’s physical location
Service Features ACL Standard 1 K and extended ACL
Time Range ACL
Flow classification and flow definition based on source/destination MAC address, VLAN, 802.1p, ToS, DiffServ, source/destination IP(IPv4/IPv6) address, TCP/UDP port number, protocol type, etc
packet filtration of L2～L7 deep to 80 bytes of IP packet head
QoS Rate-limit to packet sending/receiving speed of port or self-defined flow
Packet mirror and redirection of interface and self-defined flowPriority remark to port or self-defined flow and provide 802.1P, DSCP priority and Remark
Super queue scheduler based on port or self-defined flow. Each port flow supports 8 priority queues and scheduler of SP, WRR,
SP+WRR, etc.
Multicast IGMPv1/v2/v3 Snooping
IGMP Filter
MVR and cross VLAN multicast copy
IGMP Fast leave
IGMP Proxy
L3 multicast to be 64
Reliability Loop Protection EAPSERPSPVST and GERP (recover-time <50ms)
Loopback-detection
Link Protection FlexLink (recover-time <50ms)
RSTP/MSTP (recover-time <1s)
LACP (recover-time <10ms)
Device Protection Double fault-tolerant backup of host program and configuration files
Maintenance Network Maintenance Port real-time, utilization and transmit/receive statistic based on Telnet
LLDP
802.3ah Ethernet OAM
RFC 3164 BSD syslog Protocol
Ping and Traceroute
Device Management CLI, Console port, Telnet and WEB management
Stack
OAM（802.3ah and 802.1ag）
VCT
User hierarchical permission
RADIUS
SNMP V1/V2c/V3
  • GE Port – 20*100/1000Base-X
  • Expansion Port – 4*GE Combo, 4*10GE SFP+
  • Forwarding Capacity – 95Mpps
  • Backplane – 128Gbps
  • Power Consumption – ≤60W
  • 16K MAC address
  • AC 220V
Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “GCOM S5330-28SX L2+ Switch”

Related Product